Movall Electric Guitar Effect Pedals
Movall Electric Guitar Effect Pedals
🏷️USE CODE "ROCKON10": GET 10% OFF
Couldn't load pickup availability
"Unleash your sound with Movall Electric Guitar Effect Pedals."
MP-301 VanGolem Phase
Introduction:
It is a classic analogue phase that gives you just a bit more control over your phased sound than the average old school phase. In addition to Speed, you can also control Width and Feedback. Whether you want a slight movement in your lead sound or deep and watery phase sweeps for wide cleans, this tiny little box can do it all.
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Classic Design:
As you can see, Movall pedal have a classic mini size, convenient and durable. True bypass switch lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Power Supply: 9V DC center negative
Current Draw: 30 mA
MP-302 PlexiTroll Distortion
Introduction:
Movall pedal can make your little fresh tube AMP a fuller and louder sound as the "Full Stack" sound effect. Maintaining the original sound structure. Therefore,it will be no panic frequency. Neither dull bass nor obtrusive medium frenquency. All-sided high-gain distortion with excellent dynamic response and definition, especially suit for playing 3 Working Modes: Natural/Tight/Classic.
3-way Tone Switch:
- Natural: Neutral mode that delivers an organic, natural tone.
- Tight: A more aggressive tone with enhanced bottoms and edges.
- Classic: Provides a classic UK-style high gain sound with warm mids.
Features:
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Power Requirement: 9V DC center negative
Current Consumption: 36mA
Product Dimensions: 9.6*4.2*5CM
Weight: 0.25kg
MP-303 Octopuzz Fuzz
Introduction:
This pedal has an abundant and great sound which can be compare to the violin tone. Adorable mini outlook appearance with three simple knobs makes it stand out of the crowds of some other costly pedals. It is a classic Fuzz pedal, the full and sweet tone would let the player's emotion outflow deeply while playing with this pedal.
Classic Design:
Movall Fuzz have a classic mini size, convenient and durable. True bypass switch lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Aluminum-alloy classic, stable and strong.
Slip resistance bottom.
Input: 1/4” monaural jack (impedance: 470k Ohms).
Output: 1/4” monaural jack (impedance: 1k Ohms).
Power Supply: 9V DC adapter center negative.
Current Draw: 20 mA.
MP-304 Clean Boost
Introduction:
A clean boost pedal can add a bit more gain when engaged, 20db+clean boost with ±15db 2 band EQ.
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Classic Design:
As you can see, Movall pedal have a classic mini size, convenient and durable. True bypass switch lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Power: 9V DC adapter center negative.
Product Dimensions: 9.6*4.2*5CM.
Weight: 0.25kg.
MP-305 Pandora Compressor
Introduction:
Classic optical compressing sound with smooth attack and decay, it preserves the original signal transients perfectly. The circuit of this compressor pedal has been optimized according to the characteristics of the electric guitar and performs outstandingly over the spectrum of different playing styles.
Small and exquisite.
Full metal shell, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Classic Design:
As you can see, Movall MP305 compressor pedal have a classic mini size, convenient and durable. True bypass switch lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Input: 1/4” monaural jack (impedance: 470k ).
Output: 1/4” monaural jack (impedance: 1k Ohms).
Power Supply: 9V DC adapter center negative.
Current Draw: 10 mA.
MP-306 Hydralay Delay, MP-307 Hammer Noise Gate, MP-308 Baltic Beast Overdrive, MP-309 Chorus Mermaid, MP-311 Spring Reverb, MP-315 Classical Overdrive, MP-316 Two Yetis Overdrive and more:
Introduction:
The delay is an analog sounding digital delay with all the great characteristics of a bucket brigade delay line (BBD). With its 600ms of maximum delay time and feedback that can be pushed into buildup, you can achieve a wide range of your favorite delay sounds.
True bypass design:
True bypass switch lets your instrument’s signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Features:
Small, lightweight and exquisite.
Aluminum-alloy casing.
True bypass design.
Power: 9V DC adapter center negative.
LED indicator shows the working state.
Product Dimensions: 9.6*4.2*5CM
Weight: 0.25kg
Introduction:
This guitar pedal noise gate can assist to reduce the noise hum and buzz of other pedals(especially high gain distortion) in your pedal chain. With 2 functional knobs(hard/soft), the sensitivity control dictates the level when the noise gate kicks in. At higher settings anything below aggressive strumming will be cut. The two way selector switch controls if the gate kicks in aggressively switch a steep volume cut, or more softly with a gradual cut. This guitar pedal noise gate is compatible for most electric guitar, acoustic guitars and bass.
Features:
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Power: 9V DC center negative
Product Dimensions: 9.6*4.2*5CM
Weight: 0.25kg
Introduction:
Transparent and singing low gain overdrive pedal. Use it for added gain on a crunch sound amp or for light overdrive on a clean amp.
Easy to operate, with 4 function knobs, Drive, Level, High and Low. You can just control four function knobs and choose the model you want to made you own music tone. Enjoy your fun and colorful life.
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Classic Design:
As you can see, Movall MP308 Overdrive Pedal have a classic mini size, convenient and durable. True bypass switch lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Input: 1/4"monaur al jack (impedance:1M Ohms )
Output:1/4"monaur al jack (impedance:100 Ohms)
Power Supply：9V DC (Negative in the center).
Current Draw:20 mA
Introduction:
Two simple knobs can realize the conversion between pure natural chorus and fantastic trill. Without redundant regulation, just the combination of two knobs (depth and rate) allows you to create fantasy trip of notes.
True bypass design:
True bypass switch lets your instrument’s signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Aluminum-alloy classic, stable and strong.
True bypass for zero tone coloration.
Slip resistance bottom.
Input: 1/4” monaural jack.
Output: 1/4” monaural jack.
Power Supply: 9V DC Center Negative.
Current Draw: 10 mA.
Introduction:
Reflector Spring Reverb MP-311 is similar to analog the reverb effect of the spring of the amplifiers.
Digital circuit design, and variety of reverberation effect adds musical color to you tone.
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Classic Design:
As you can see, Movall MP311 reverb pedal have a classic mini size, convenient and durable. True bypass switch lets your instrument's signal pass through a non-electronic bypass line when the effect is disengaged, feeding your amp with direct, unaltered signal from your instrument.
Specifications:
Input & Output Jack：1/4’’ mono audio jack.
Power Supply：9V DC (Negative in the center).
Current Draw: 50mA.
Introduction:
This overdrive pedal with three control knobs (Drive, Level, Tone) and two working modes (HOT/WARM). HOT/WARM reproducing the classical electronic overdrive with plump, warm and sweet effect.
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Specifications:
Input: 1/4"monaur al jack (impedance: 1M Ohms )
Output: 1/4"monaur al jack (impedance:100 Ohms)
Power Supply：9V DC (Negative in the center).
Current Draw:20 mA
Introduction:
Unlike the regular diode clipping circuits, the Two Yetis drive is a cross between a distortion and overdrive. It has 2 working modes: HP / LP. Low peak mode (LP) colors the original sound very little but works well for clean boosting.
Specifications:
Aluminum-alloy classic, stable and strong.
Slip resistance bottom.
Input:1/4"monaur al jack (impedance:1M Ohms).
Output:1/4"monaur al jack (impedance:100 Ohms).
Power Supply: 9V DC adapter center negative.
Current Draw: 20 mA.
Introduction:
Movall Tremolo guitar effect pedal is applied a photoelectric circuit which sounds just like one of the tremolos you would find in vintage tube amps. It is flexible yet easy to use. A simple three knob control allows for adjustment of rate (speed), depth (how much the tremolo fluctuates) and wave. The wave knob is very cool, because you can change it from a subtle triangle wave to a drastic square wave. This way you can achieve the classic tremolo sounds we all know and love as well as the more modern "stutter" sounds. It's also possible to create amazing rhythmic pads, especially if combined with a cool delay sound.
Specifications:
Small, lightweight and exquisite.
Aluminum-alloy classic, stable and strong.
True bypass for zero tone coloration.
Slip resistance bottom.
Input: 1/4” monaural jack.
Output: 1/4” monaural jack.
Power Supply: 9V DC (Negative in the center).
Current Draw: 50 mA.
Introduction:
Movall MP-318 Preamp Pedal for acoustic guitars, Produce clean tone and make the sound of the guitar more focused, melodious, bright, and mellow.
TREBLE increases the brightness of the tone.
Bass used to adjust the bass tone.
Gain used to control the gain degree
ANTI FEEDBACK avoid volume feedback.
Specifications:
Aluminum-alloy classic, stable and strong
Slip resistance bottom
Power Supply: 9V DC center negative
LED indicator shows the working state
Product Dimensions: 9.6*4.2*5CM
Weight: 0.25kg
Introduction:
The Dynostaur Distortion pedal has been developed to give that classic Dyna Red distortion sound. The 4 knob configuration gives you all the tone options needed to reproduce the famous Plexitone sound and that identifiable classic rock distortion.
The 4 controls are: Level, Lomid, Tone and Gain. The desired combination can produce a wide and dynamic sound from just above overdrive to a crunchy distortion with lots of low dirt and growl when required.
Specifications:
Aluminum-alloy classic, stable and strong.
Slip resistance bottom.
Input:1/4"monaural jack (impedance:470k Ohms)
Output:1/4"monaural jack (impedance:1k Ohms)
Power Supply: 9V DC center negative.
Current Draw: 10 mA
Weight: 0.25kg
Introduction:
Movall MP-320 MINOTAUR Overdrive Vintage tube overdrive sound with wide dynamic range and flexible controls, this pedal gives you a wide tonal range from smooth whispers to searing leads. Excellent little drive for all player types.
Features:
Aluminum-alloy classic, stable and strong.
LED indicator shows the working state.
True bypass provides transparent tone.
Slip resistance bottom.
Input:1/4"monaur al jack (impedance:1M Ohms).
Output:1/4"monaur al jack (impedance:100 Ohms).
Power Supply: 9V DC adapter center negative.
Current Draw: 20 mA.
Introduction:
The 'Heavy Thunder' is a high gain distortion pedal with plenty of punch. With 3 controls - Level, Gain and Mid. The 2-way selector switch - Extreme/Classic, allows a subtle variation from the more compressed classic tone to the more open modern extreme sound.
Classic mini size, convenient and durable.
Aluminum-alloy casing, stable and strong.
Slip resistance bottom.
LED indicator shows the working state.
Specifications:
Input: 1/4"monaural jack (impedance:470k Ohms)
Output: 1/4"monaural jack (impedance:1k Ohms)
Power Supply: 9V DC center negative
Current Draw: 3 mA
Package includes:
1 x Movall Electric Guitar Effect Pedal with instruction manual.
NEED MORE INFORMATION?
Frequently asked questions
Welcome to the Guitarmetrics FAQ page! We're thrilled to have you here. We know that as a guitar player, finding the right accessories to complement your instrument is just as important as finding the right guitar. That's why we've put together this page to answer some of the most frequently asked questions about our unique guitar accessories.
So, take a look around our FAQ page, and if you don't see the answer to your question, don't hesitate to reach out to us. We're always happy to help you find the perfect accessory for your guitar. Thank you for choosing Guitarmetrics!
Q. How can I pay?
A. We accept payments from major credit/debit cards (Visa or Master card) through PayPal for secure transactions. We specifically use PayPal for easy refunds and secure checkout.
NOTE: THERE IS NO NEED TO CREATE A PAYPAL ACCOUNT. CUSTOMERS CAN CHECKOUT USING THE OPTION "PAY WITH CREDIT OR DEBIT CARD" IN PAYPAL
We also accept payments in cryptocurrency through Coinbase.
Q. How long will it take to receive a tracking number?
A. It will take usually 2-4 business days.
Q. Where can I place order from?
A. You can place order from any country. We ship worldwide.
Q. Is shipping really free?
A. Yes, we offer free shipping worldwide.
Q. How long will it take for my product to arrive?
A. Find your region and estimated delivery time in the table below:
|
Region |
Delivery estimate |
|
UNITED STATES |
7-15 Days |
|
EUROPE OCEANIA SOUTH-EAST ASIA |
9-24 Days |
|
ALL OTHER COUNTRIES |
14-30 Days |
It will usually take 1-3 wks for all orders to arrive. Time can vary depending on the demand of the product and the country from which the order has been placed. Orders placed from UNITED STATES will arrive early.
Q. Where is the company located?
A. Here is our company office address : 340 S LEMON AVE #3596
WALNUT, CA 91789
Our Primary warehouse is located in China. We also have two warehouses in United states and India each. We ship majority of the orders from our China warehouse.
Q. Which currency will I be charged in?
A. We process all orders in USD. While the content of the cart is displayed in several currencies, you will checkout using USD at the most current exchange rate.
Q. Will I receive a confirmation number when i place a order?
A. Yes, all customers will receive a confirmation number after placing their orders.
Please contact us if you don't receive one within 24 hours.
Q. Who can I contact if I have a problem with my order?
A. All inquiries can be forwarded to our support email- support@guitarmetrics.com
We reply to all customer queries within 12 hours.
Q. Is checkout on this site safe and secure?
A. You can be absolutely sure that all purchases here are safe and secure. We use 100% SSL Encryption.
Q. If I enter my email address will you sell my information?
A. We do not sell our customer's information. Emails are strictly for follow-up and to send newsletters of our promotions and discount coupons. You can even choose to erase your personal Info through our My Personal data tab.
Q. Will I (the customer) have to pay customs?
A. For most of our products you will not have to pay customs, but it depends on item weight, where you are located and if you order more than 1 piece.